Posted: October 17th, 2002
Written by: Justin "The Sheriff" Woods

Getting Inside of the case

          

I already covered it earlier, but I thought it would be good to show a closer picture of the door fan. You can see the black screws, which gives a nice finished look. The back of the case is clean and you can see the 2 additional included 80mm fans. These fans are installed in little plastic mounts which pop out. I'll cover these in detail later. Also note the inclusion of the Antec Truepower power supply, in this case, a 430 watt beast, which I will also talk about later.

          

The case is equipped with tons of expansion space. The slot covers have small tabs on the bottom which allows a little easier removal and install. The second picture shows the case opening. At this point, I am holding it in place, because it isn't on hinges. The door is a little on the heavy side, probably due to the addition of a lock and the extra fan, I liked the sturdy feel of the case, and the weight on the door is acceptable.

Next Page: Inside the case continued