It's been a long time since I've come back to this site. Kind of need some newbish help. I recently got my hands on a D-Link DI-524 wireless router. My home network currently uses a D-Link DI-704P router (it has the print server). I sort of like the functionality of the print server on the old router so I was thinking of just adding the wireless router to the existing network to give my network the wireless capabilities. So from the wired router (let's call it A) I connected an ethernet cable from one of the LAN ports to a LAN port on the wireless router (call it B). On router A I set the DHCP pool range to be from 100 to 200 (the network is 192.68.0.xxx). On router B, I disabled DHCP and gave it a LAN IP address of 18.104.22.168 so that it would appear as the same network. To that point, it does not work. The only area I'm sort of sketchy about is what to do with the WAN settings. I was thinking of maybe using an arbitrary static WAN IP address and then assigning the gateway as router A, but I'm not too clear on that much. D-Link routers don't have a router/gateway mode I can switch between like on a Linksys router. Any help would be appreciated. Please don't just tell me to get a switch or something. I know this setup is possible and I don't think I'm too far off from making it work. Thanks.