First off, I dont know anything about car stereos. I have an 88 Grand Prix, I acquired a Kenwood CD deck from Jishory a few days ago. The stereo in the car right now is the factory stereo. There is a tape deck and a radio. I pulled out the stereo inside the car and all of the wires are way different than the harness that came with the stereo I got from Josh. Do I need to buy anything to make the Kenwood fit? Is there a way I can match up the wires and just use wire connectors? If so, how would I go about finding out which wire goes where? Thanks. I found this while searching around. How accurate does the info look? http://72.14.253.104/search?q=cache... connector series gm&hl=en&gl=us&ct=clnk&cd=1
1988-91 Pontiac Grand Prix Stereo Information Constant 12V+ Orange Switched 12V+ Yellow Ground Black Illumination Gray Dimmer Brown Antenna Trigger Pink Antenna Right Rear Front Speakers 4" x 6" Dash Left Front (+) Tan Left Front (-) Gray Right Front (+) Light Green Right Front (-) Dark Green Rear Speakers 6" x 9" Rear Deck Left Rear (+) Brown Left Rear (-) Yellow Right Rear (+) Dark Blue Right Rear (-) Light Blue I got this from an installers manual so I'd assume pretty accurate And like davey said find an adapter at walmart and you're all set